VTech CareLine SN1196 User Manual

36
Telephone settings
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
The telephone plays two beeps if you enter an invalid number.
•
•
Voice Announce caller ID
The voice announce caller ID feature lets you
know who’s calling without having to look
at the display. When you have an incoming
call, the handset and/or base speaks “Call
from...” and the name of the caller based
on the phonebook or caller ID information. If
the caller’s name is private or unknown, the
phone number up to the last 11 digits will be
announced. If the caller’s phone number is
also private or unknown, no information will
be announced.
Press MENU when the handset/base is not in use.
Press or to scroll to Annc Caller ID, then press SELECT on the
cordless handset/SELECT on the telephone base.
Press or to scroll to the desired option, then press SELECT on
the cordless handset/SELECT on the telephone base.
Set all On/Off - Change the setting for all devices.
Local handset - Change the setting for that handset only.
Base - Change the setting for the telephone base only.
Pendant - Change the setting for the pendant only.
Press or to scroll to On or Off, then
press SELECT on the cordless handset/
SELECT on the telephone base. The screen
displays Annc CID ON on all devices or
Annc CID OFF on all devices. You hear a
confirmation tone.
1.
2.
3.
•
•
•
•
4.
9:48am 5/20
ANNC CALLER ID
Set all On/Off
Base
BACK
SELECT
9:48am 5/20
Set date/time
Pendant
Annc Caller ID
BACK
SELECT
Set date and time
Annc CID OFF
on all devices

VTech CareLine SN1196 Specifications

General

Brand	VTech
Model	CareLine SN1196
Category	Cordless Telephone
Language	English