117
Answering system operation
Remote access
A two-digit security code is required to access the answering system
remotely from any touch-tone telephone. The preset code is 19. See
Remote access code on page 106 to change it.
Dial your telephone number from any touch-tone telephone.
Enter the two-digit security code after the announcement and the
long beep.
The system announces, “Press star for reminder or press pound to
listen to messages.” Press or #.
After pressing , you can enter one of the following
remote commands:
Command Function
1 Review reminders.
2 Set reminders.
3 End the call.
4 Turn reminder off.
1.
2.
3.
•
To Next Page
Loading...
Need help?
General
