VTech CareLine SN1196 User Manual

61
Transfer a call
To transfer a call from the telephone base:
During a call, press MENU. Press or to
scroll to Transfer, then press SELECT.
If you have two or more handsets/
pendants, your handset shows
TRANSFER TO: Press or to scroll to
the desired device and then press
SELECT. You may also enter a
destination handset number (1-9), or
enter 0 for the telephone base,
followed by 0-2 for HANDSET 10 to
HANDSET 12, or followed by # for
all devices..
The outside call is put on hold and the telephone base shows
Transferring call/Transferring call to all.
The destination device rings. The destination handset shows
Transfer from BASE 0.
To answer the call on the destination handset, press
,
or any
dialing key (0-9 or ).
-OR-
To answer the call on the pendant, press .
If the destination device does not answer the call within 30 seconds,
the originating device displays No response to transfer. The call
will be reverted to the originating device.
If the destination device is in use, in the phonebook or caller ID log,
not powered or out of range, the originating device displays
No answer. Try again. and then reconnects to the outside call.
•
•
1.
•
2.
9:48am 5/20
TRANSFER TO:
HANDSET 2
All pendants
BACK
SELECT
9:48am 5/20
Phonebook
Caller ID log
Transfer
BACK
SELECT
Telephone operation

VTech CareLine SN1196 Specifications

General

Brand	VTech
Model	CareLine SN1196
Category	Cordless Telephone
Language	English