VYBO Electric Vector V810 - Group C5: Control Optimization Parameters

Chapter 4: Description of functions (abbreviated)
75
C0.03
Digital setting of torque
control
-200.0% - 200.0%
150.0%
☆
C0.05
Maximum frequency forward
at torque control
0.0 Hz – maximum frequency
50.00Hz
☆
C0.06
Maximum frequency
backward at torque control
0.0 Hz - maximum frequency
50.00Hz
☆
C0.07
The acceleration time for
torque control
0.00s - 650.00s
0.00s
★
C0.08
The deceleration time for
torque control
0.00s - 650.00s
0.00s
☆
Group C1 – C4: Reserved
Group C5: Control optimization parameters
C5.00
Upper limit of PWM frequency
switching
0.0 Hz – 15 Hz
12.00Hz
☆
C5.01
PWM modulation mode
0: Asynchronous modulation
1: Synchronous modulation
0
☆
C5.02
Compensation method
0: No compensation
1: Compensation mode 1
2: Compensation mode 2
1
☆
C5.03
Random dimension of P
0: Forbidden
1-10: Random PWM carrier frequency
0
☆
C5.04
Open limitation of current
0: Enabled
1: Disabled
1
☆