VYBO Electric Vector V810 - Replacement of Wearing Parts; V810 Inverter Warranty; Inverter Tests

V 810 Chapter 6 Maintenance
90
Inspected parts
Scope of inspection
Solution
The screws of terminals
Whether the screws of control
terminals are loose
Tighten screws
PCB
Dust and dirt
Vacuum clean.
Fan
Abnormal noise, abnormal
vibration, whether it has used up
20 000 hours
Clean from dirt or replace
the fan
Electrolytic capacitor
Whether the colour is changed
and the smell is abnormal
Replace the electrolytic
capacitor
Heatsink
Dust and dirt
Vacuum clean.
Power components
Dust and dirt
Vacuum clean.
6.3 Replacement of wearing parts
Fans and electrolytic capacitors are included, replace them regularly to ensure long-term,
safe and trouble-free operation. The exchange periods are as follows:
• Fan: must be replaced every 20 000 hours;
• Electrolytic capacitor: replace it if it is running from 30 000 to 40 000 hours.
6.4 V 810 Inverter warranty
6.4.1 Inverter tests
The frequency converter was thoroughly tested and pre-programmed by the manufacturer
before shipment. The properties of the V 810 product correspond to the technical
documentation, provided that it is installed and used in accordance with the instructions
and recommendations given in the technical documentation and in the operating
instructions.