Wacker Neuson Dumper 6001 User Manual

BA 5001-6001 US – Edition 1.2 * 6001b410.fm 4-1
Troubleshooting
4 Troubleshooting
The information given in this chapter is provided for maintenance staff, for fast and reliable
detection of malfunctions and their appropriate repair.
Repairs must be performed by authorized staff.
4.1 Engine trouble
Problem Possible causes See
Engine does not start or is not easy to start
Wrong SAE grade of engine lubrication oil 5-33
Fuel grade does not comply with specifications 5-33
Defective or flat battery 5-30
Loose or oxidized cable connections in starter circuit
Defective starter, or pinion does not engage
Wrong valve clearance
Defective fuel injector
Engine starts, but does not run smoothly or faultless
Fuel grade does not comply with specifications 5-33
Wrong valve clearance
Injection line leaks
Defective fuel injector
Engine overheats. Temperature warning system
responds
Oil level too low 5-9
Oil level too high 5-9
Dirty air filter 5-14
Dirty oil radiator fins
Defective fuel injector
Insufficient engine output
Oil level too high 5-9
Fuel grade does not comply with specifications 5-33
Dirty air filter 5-14
Wrong valve clearance
Injection line leaks
Defective fuel injector
Engine does not run on all cylinders
Injection line leaks
Defective fuel injector
Insufficient or no engine oil pressure
Oil level too low 5-9
Machine inclination too high (max. 25 %)
Wrong SAE grade of engine lubrication oil 5-33
Engine oil consumption too high
Oil level too high 5-9
Machine inclination too high (max. 25 %)

Wacker Neuson Dumper 6001 Specifications

General

Brand	Wacker Neuson
Model	Dumper 6001
Category	Construction Equipment
Language	English