3-30 BA 5001-6001 US – Edition 1.2 * 6001b330.fm
Operation
Tank for washer system
The tank is located at the rear right of the cab
Important
In winter: add antifreeze for washer systems to the water.
Refer to the antifreeze instructions for further information on concentrations.
The rubber diaphragm in the non-return valve in the housing conglutinates if
stored in a dry condition over a longer period of time. In order to restore
this valve's function, moisten this non-return valve, dip it briefly in water and
then blow air through it.
Fig. 53: Tank for washer system
To Next Page
Loading...
