5-32 BA 5001-6001 US – Edition 1.2 * 6001b530.fm
Maintenance
Exterior of the machine
NOTICE: Cleaning the machine improperly may cause engine damage.
☞
Follow the recommendations below to properly clean the machine and the engine.
The following articles are generally suitable:
• High-pressure cleaner
• Steam jet
Engine compartment
CAUTION
Crushing, cutting, or burn hazards.
☞ Stop the engine before cleaning.
NOTICE: Possible sensor damage. Water or steam jet cleaners can penetrate
sensitive electronic components, leading to sensor failure and possible engine
damage.
☞
Allow the machine to cool completely before cleaning the engine with a water or steam
jet.
☞ Do not point the jet directly at electric sensors such as the oil pressure switch.
Threaded fittings and attachments
All threaded fittings must be checked regularly for tightness, even if they are not listed in
the maintenance schedules.
☞ Engine fastening screws.
☞ Fastening screws on the hydraulic system.
☞ Line and pin fastenings on the attachment.
Retighten loose connections immediately. Contact an authorized service facility if
necessary.
Pivots and hinges
Lubricate all mechanical pivots on the machine (such as joints) and fittings at regular
intervals even if they are not listed in the lubrication plan.
To Next Page
Loading...
