Wacker Neuson Dumper 6001 - Specifications; Chassis; Engine; Drive Pump

BA 5001-6001 US – Edition 1.2 * 6001b610.fm 6-1
Specifications
6 Specifications
6.1 Chassis
Sturdy steel sheet chassis, rubber-mounted engine
6.2 Engine
The measurements are Metric (Imperial).
6.3 Drive Pump
Engine Model 5001 Model 6001
From serial number AD51001 From serial number AD60001
Product Deutz diesel engine Deutz diesel engine
Type D2011 L04 TD2011 L04
Design Water-cooled 4 stroke diesel engine Water-cooled 4 stroke diesel engine
No. of cylinders 4 4
Displacement
3619 cm³
(220.8 in
3
)
3619 cm³
(220.8 in
3
)
Nominal bore and stroke
96 x 125 mm
(3.8'' x 4.9'')
96 x 125 mm
(3.8” x 4.9”)
Output 47.5 kW (64 hp) +/- 5 % at 2600 rpm 64.6 kW (87 hp) at 2600 rpm
Interm. torque 200 Nm (148 ft.lbs.) at 1600 rpm 266 Nm (196 ft.lbs.) at 1600 rpm
Max. engine speed without
load
2600 rpm +/- 25 rpm 2660 rpm +/- 25 rpm
Idling speed ~ 900 rpm +/- 25 rpm ~ 900 rpm +/- 25 rpm
Fuel injection system Direct injection Direct injection
Starting aid Glow plugs Glow plugs
Max. inclined position
(engine no longer supplied
with oil):
30° in all directions 30° in all directions
Exhaust values according to Tier 3 Tier 3
Variable displacement pump
Model 5001 Model 6001
Design
Axial piston pump Axial piston pump
Displacement
56 cm³/rev (3.4 in
3
/rev) 71 cm³/rev (4.3in
3
/rev)
Flow rate
146 l/min (38.6 gal/min) 184 l/min (48.6 gal/min)
Max. service pressure
450 bar (6526 psi) 450 bar (6526 psi)
Boost pump (integrated in variable displacement pump)
Design
Gear pump Gear pump
Displacement
11.6 cm³ (0.7 in
3
) 19.6 cm³ (1.2 in
3
)
Charging/boost pressure
25 bar
(362.6 psi
)
25 bar
(362.6 psi
)