WAGO Pro 2 - Connections

2787-2146 (/0000-00x0)Properties
14 Product manual | Version: 1.2.2
Power Supply Pro 2
Position Comment For Details, See Section
9 Information on the instruction leaflet –
10 Field for guidelines, approvals and standards 8Guidelines, approvals and stan-
dards [}25]
11 Label with product-specific information Label
3.4 Label
An additional label with product-specific information is attached to the type label. It con-
tains the following information:
SN: (37S)
UN315640102
27872146
0202020400005001
0217 02 02 02
40_63 1-0006-50-11
1
2
3
4
5
6
7
Figure3: Label
Table5: Legend for Figure “Label”
Position Comment Details
1 2D data matrix code Contains the information from positions
2…5
2 Key number Fixed information (37S)
3 ID number per D-U-N-S® Fixed information (WAGO Minden)
4 WAGO item number or internal SAP number Product-specific
5 Consecutive number Product-specific
6 Production date and revision • Production date
• Revision index (xx yy zz)
7 Internal manufacturer product number Product-specific
Table6: Revision index structure
Software Index Hardware Index Boot Loader Index
xx yy zz
3.5 Connections
3.5.1 Connectors
Observe the maximum permissible conductor cross sections for the signal and power ca-
bles (see section 8Technical Data [}18]).
Check the associated operating voltage before connecting the equipment (see section
8Technical Data [}18] or section Type label).
Additional information on the connection technology is provided in section .