WAGO Pro 2 - Input; Table 16 Technical Data - AC Input; Table 17 Technical Data - Inrush Current; Table 18 Technical Data - Mains Failure Buffering Time

2787-2146 (/0000-00x0) Properties
Product manual | Version: 1.2.2 19
Power Supply Pro 2
50 mm 130 mm
130 mm
Figure9: Dimensions
3.9.2 Input
Table16: Technical Data – AC Input
Property Value
Number of phases 1
Nominal input voltage 100 … 240VAC
Input Voltage Range 90 ... 264 VAC
130 … 240VDC
1)
Input frequency 50 … 60 Hz
Grounding systems TN, TT and IT networks
Input current (typ.)
2)
110VAC 2.95A
230VAC 1.2A
Power factor (typ.)
2)
110VAC 0.99
230VAC 0.95
1)
For DC operation, external overcurrent protection must be provided!
2)
At nominal load
Table17: Technical Data – Inrush Current
Property Value
Inrush current (typ.)
1)
230VAC 9.2A
1)
At room temperature of 25°C and after 1 ms
Table18: Technical Data – Mains Failure Buffering Time
Property Value
Mains failure buffering time, typ.
1)
110VAC 34 ms
230VAC 34 ms
Holding time, typ.
1)
110VAC 37 ms
230VAC 37 ms
1)
At nominal load
Table19: Technical Data – Input Connection
Property Value
Cross-section Solid 0.08 … 2.5 mm² / 28 … 12 AWG