WAGO Pro 2 - Configuration; Requirements; System Requirements; Install WAGO Interface Configuration Software

2787-2146 (/0000-00x0) Configuration
Product manual | Version: 1.2.2 37
Power Supply Pro 2
10Configuration
10.1 Requirements
10.1.1 System Requirements
The following system requirements must be met for the WAGO Interface Configuration
software to be installed:
Minimum System Requirements
Table47: Minimum System Requirements
Components Requirements
Operating system • Windows 7 (32- and 64-bit)
• Windows 8 (32- and 64-bit)
• Windows 8.1 (32- and 64-bit)
• Windows 10 (32- and 64-bit)
Memory 2GB
Free hard disk space 150MB
Processor 1GHz or higher, 32-bit (x86) or 64-bit (x64)
Screen resolution 800 × 600 pixels
Recommended System Requirements
Table48: Recommended System Requirements
Components Requirements
Operating system Windows 10 (64-bit)
Memory 8GB
Free hard disk space 250MB
Processor 1GHz or higher, 64-bit (x64)
Screen resolution 1920 × 1080 pixels
10.1.2 Install WAGO Interface Configuration Software
1. Open the üWAGO website.
2. Download the WAGO Interface Configuration software G2.
3. Start the installation process by double-clicking the installation file. This requires ad-
ministrator rights.
4. Choose whether to create a desktop icon and whether you want to launch the soft-
ware immediately.
5. Click [Finish] to complete installation.
10.1.3 Configure Product
Configuring the product requires the WAGO Interface Configuration software to be in-
stalled (see also section 8Install WAGO Interface Configuration Software [}37]).
You can use the software to configure the product either online or offline (see also sec-
tion Dialog: Settings).