EasyManuals Logo

WAGO Pro 2 User Manual

WAGO Pro 2
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
2787-2146 (/0000-00x0)Provisions
6 Product manual | Version: 1.2.2
Power Supply Pro 2
1Provisions
This document applies to the following products:
Table1: Scope of Applicability
Item no. Item description
2787-2146 WAGO Power Supply Pro 2
2787-2146/0000-0030 WAGO Power Supply Pro 2, with DNV GL Approval
2787-2146/0000-0070 WAGO Power Supply Pro 2, with DNV GL approval and protective coating
Note
Observe the applicable documentation!
This product must only be installed and operated according to the instructions of the com-
plete Instructions for use. Knowledge of the complete Instructions for use is required for
proper use.
1. Carefully read the Product Manual.
2. Before commissioning, follow the instructions in section 8Safety [}10].
Table2: Complete instructions for use
Document Type Contents
& Product Manual Contains all the product-specific information for a product.
& Instruction leaflet Is included with each product. Contains initial information on safe handling of
the product.
All the documentation and information is available at: üwww.wago.com.
1.1 Intended Use
The 2787 Series WAGO Power Supply Pro 2 provides DC voltage to electrical or elec-
tronic devices, such as industrial control systems or display, communication and measur-
ing devices.
The product is an open system and is designed for installation in a additional enclosure.
The product is designed for use in dry indoor rooms.
Operation of the products in industrial area is permitted.
The product meets the EMC requirements for residential, office and commercial areas
as well as small businesses, if the product used complies with the required emissions
of interference (emission limits).
Operation of the product in other application areas is only permitted when correspond-
ing approvals and labeling are present.
Improper Use
Improper use of the product is not permitted. Improper use occurs especially in the follow-
ing cases:
Non-observance of the intended use
Use without protective measures in an environment in which moisture, salt water, salt
spray mist, dust, corrosive fumes, gases, direct sunlight or ionizing radiation can occur

Table of Contents

Other manuals for WAGO Pro 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WAGO Pro 2 and is the answer not in the manual?

WAGO Pro 2 Specifications

General IconGeneral
BrandWAGO
ModelPro 2
CategoryPower Supply
LanguageEnglish