WAGO Pro 2 - Page 57

2787-2146 (/0000-00x0) Configuration
Product manual | Version: 1.2.2 57
Power Supply Pro 2
Section Indicator Description
Operating condition Status DC O.K. Green indicator: Status OK
Red indicator: There is a message
Status of digital input
Electronic circuit breaker
tripped
Warnings Output under-voltage Green indicator: Status OK
Red indicator: There is a warning
Output over-voltage
Overload
Adjustable output current
limit exceeded
Power Boost supplied
1)
Top Boost supplied
1)
High device temperature
Errors Overheating, device switched
off
Green indicator: Status OK
Red indicator: Error present
No output voltage
Output short circuit
Counters High device temperature This shows how long the product has been operated at
a high device temperature. The displayed value is the
sum over the previous operating time (unit: h). The
hours themselves are recorded and added up over the
entire product life cycle.
Overheating, device switched
off
This shows how long the product switched off due to
excess temperature. The displayed value is the sum
over the previous operating time (unit: h). The hours
themselves are recorded and added up over the entire
product life cycle.
Number of supplied Top
Boosts
The number of all Top Boosts generated is displayed
here. The displayed value is the sum over the previous
operating time.
Number of supplied Power
Boosts
The number of all Power Boosts generated is dis-
played here. The displayed value is the sum over the
previous operating time.
Standby Time The standby time of the product (unit: h) is displayed.
Operating Time The operating time of the product (unit: h) is displayed.
1)
When Power Boost or Top Boost is output, this is signaled for 5s.