Wang 200 Series - Page 115

1640 CONTROLLER (200 DPI)
5 . 5 Parts Replacement (Sheet 2 of 2)
D Remove screw from 1640
Controller fastening plate.
Remove board from expansion
slot.
\
\
To Install
D Verify 1640 Controller ljO
Address Space switch settings
(•5.2).
NOTE
1640 Controller (200 DPI) must
be installed in a 16-bit expansion
slot.
fl Reverse removal procedures to
complete the installation.
e END
741-1859
Page 5-10
COMPANY CONFIDENTIAL