Wang 200 Series - Testing Interface Board

2 . 5 Installation
802.3 INTERFACE
2.5.11 Testing Interface Board
Testing the 802.3 Interface board
consists of running one or more of the
diagnostic programs on the diagnostic
software diskette that was shipped
with the board. These tests are de-
scribed in paragraph 2.4.2. The tests
to be run are tests 0 through 4. Test
0 is a self test that runs when the
diagnostic software is initialized. Fol-
low the procedure given in paragraph
2.4.3 for running tests 1 through 4.
741-1859
Page 2-25
e END
COMPANY CONFIDENTIAL