Wang 200 Series - Parts Replacement

4. 6 Parts Replacement
MICROCONTROL
4.6.1 MicroControl Board (Sheet 1 of 2)
To Remove
CAUTION
Prior to performing any patts
replacement, the system
administrator should be present.
When the board is removed from
the card cage, a security feature
disables the onboard configuration
file memory retention: requiring
the configuration file to be
reloaded.
NOTE
Parts replacement illustrations
use Professional Computer Model
280. PC Models 240 and 380
parts replacement procedure for
this option are similar.
D Power unit OFF and disconnect
ac power.
fJ Disconnect token reader cable
connected to MicroControl
rear panel.
II Remove electronic enclosure
top/front cover.
741-1859
Page 4-11 COMPANY CONFIDENTIAL