Where is the ID label on WAREMA climatronic WebControl?
The WAREMA climatronic® WebControl does not include a separate ID label because it is controlled via a separate bus (controlbus), which only requires a bus ID. Therefore, no separate ID is necessary.
What to do if WAREMA climatronic WebControl Control Unit shows communication timeout error?
If you receive a "Communication timeout between climatronic and WebControl" error, the port on the WAREMA climatronic® control panel is likely not set to "RS485". Enable the "RS485" port on the WAREMA climatronic® control panel.
General| Mounting | DIN rail |
|---|---|
| Power Supply | 24 V DC |
| Protection Class | IP20 |
| Product Type | Control Unit |
| Compatibility | WAREMA products |
| App Control | Yes |
| User Interface | Web interface |
| Weight | 200 g |
| Storage Temperature | -20°C to +70°C |
Visual guides illustrating the physical setup and electrical connections.
Guide to setting up rooms, channels, groups, and scenes.
Instructions for controlling sun shading products and other connected devices.
How to connect to and operate the system via a web browser.
Detailed steps for configuring the system's structure.
Adjusting device positions like inclination and open/close percentage.
Using pre-programmed scenes to control multiple devices at once.
Instructions for setting IP addresses manually when DHCP is OFF.
Step-by-step solutions for frequent problems encountered during use.
To Next Page
