Waters 515 HPLC - Accessories and Spare Parts; Spare Parts

Spare parts C-1
C Accessories and Spare Parts
This appendix describes the accessories and spare parts for the Waters
515 HPLC Pump.
Spare parts
The spare parts listed in the table titled “Spare parts” on page C-1 are
recommended for customer installation. Any parts not listed in this table may
require installation by a trained Waters service representative.
Use the accessories listed in the table titled “Accessories” on page C-1 to
optimize the Waters 515 pump for your application and to simplify common
procedures.
Spare parts
Item Quantity Part number
Check Valve Assembly 2 700000254
Pump Plunger 2 WAS207069
Indicator Rod Assembly 1 WAT069506
Pump Head Support Assembly 2 WAS207112
Draw-Off Valve Assembly 1 WAS207085
Inlet Tubing Assembly (LH) 1 WAS207081
Inlet Tubing Assembly (RH) 1 WAS207082
Outlet Tubing Assembly (LH) 1 WAS207083
Outlet Tubing Assembly (RH) 1 WAS207084
Fuses, F 3.15 A/250 V (20 mm) 2 WAT163-16
Accessories
Item Quantity Part number
Plunger Wash Kit 1 WAT031870