Need help?Do you have a question about the Waters 515 HPLC and is the answer not in the manual?
General| Flow Rate Accuracy | ±1% |
|---|---|
| Solvent Selection | Up to 4 solvents |
| Maximum Pressure | 6000 psi |
| Flow Rate Range | 0.01 to 10.0 mL/min |
| Gradient Mixing | Not applicable (isocratic pump) |
| Communication Interface | RS-232 |
General introduction to the 515 HPLC Pump, detailing its features and capabilities.
Details the pump's fluid path components and their respective functions.
Explains the two primary operating modes: stand-alone and remote control.
Outlines the necessary environmental and physical conditions for properly installing the pump.
Instructions for connecting the pump to a power supply and external controllers.
Procedures for connecting the eluent supply and outlet tubing to the pump.
Details on turning the pump on and the automatic power-on diagnostic checks.
Covers essential preparation steps like priming, purging, and equilibrating the system.
Important safety precautions and general guidelines for pump maintenance.
Steps for setting zero pressure, head size, and calibrating flow rate.
Systematic approach to diagnose and resolve pump errors and malfunctions.
To Next Page
