Watlow PM LEGACY™ Limit Controller • 100 • Chapter 8 Features
Any Watlow device on the network will appear in this window and would be available for the purpose
of configuration or monitoring; simply click on the control of choice. After doing so, the screen below
will appear. In the screen shot below notice that the device part number is clearly displayed at the top
of the page (yellow highlight added for emphasis). When multiple Watlow devices are on the network it
is important that the part number be noted prior to configuring so as to avoid making unwanted con-
figuration changes to another controller. Looking closely at the left hand column (Parameter Menus)
notice that it displays all of the available menus and associated parameters within the controller. The
menu structure as laid out within this software follows:
- Setup - Operations - Factory
To Next Page
Loading...
