Watlow PM LEGACY™ Limit Controller • 37 • Chapter 4 Home Page
Home Page from anywhere: Press the Reset
key for two seconds to return to the Home Page.
Operations Page from Home Page: Press both the Up and Down key for three seconds.
Setup Page from Home Page: Press both the Up and Down key for six seconds.
Note: Keys must be held continuously until SEt is displayed in green. If keys are released when OP-
Er is displayed, press the Reset key or reset key to exit and repeat until SEt is displayed.
Factory Page from Home Page: Press both the Advance and Reset keys for six seconds.
Reset
Navigating the PM LEGACY™ Limit Controller PM6 Shown, Applies to All Models
Reset