19
Description of Controls and Functions
Toolbox Function
Touching the icon on the “Programming” Menu will allow access to the Toolbox Function:
The Toolbox Function allows access to the following fields:
Item Field Range Default When is it Displayed Additional Info
Firmware J1245x J1245x Always
J1245x
SVN XXX
Load Defaults No <> Yes No Always
Reset the programmable settings to factory
defaults.
Temperature Units °F <> °C °F Always Units used for temperature display.
Flow Units
gpm <> m³/h
<> lpm
gpm
Optional F1 or F2 Flow Sensors
present
Units used for Flow Rate display.
Energy Units
TH <> GJ
<> MBtu <>
kWh
MBtu
Optional F1 and F2 Flow Sensors
present
Units used for calculated Energy Usage
display.
Pressure Units psi <> kPa psi Always Units used for Pressure display.
Backlight 10 to 100 % 100% Always Adjust the brightness of the LCD backlight.
Reset No <> Yes No Always Reset the device.
No
Firmware
J1245x
Load Defaults
No
Flow Units
gpm
Pressure Units
psi
Temperature Units
°F
Energy Units
MBtu
Backlight
100 %
Reset
Back Up Down
Toolbox
Enter
?