52
Troubleshooting
Problem:
Solution:
Unstable control is observed at flow rates greater than the minimum
rated flow
Balancing Routine
WARNING
!
To avoid scalding, burning, thermal shock or
other hazards DO NOT use or allow anyone
to use the water at any point-of-use fixture
(faucets, sinks, tubs, showers, etc.) in the
facility's water distribution system during
Balancing Routine.
The Balancing Routine can cause higher
temperature water in the system and delivered
to point-of-use fixtures (faucets, sinks, showers,
etc.). Only qualified and authorized personnel
who fully understand the Balancing Routine’s
operation, output and risks, should perform this
action.
Personnel performing Balancing Routine and
the owner or manager of the water distribution
system MUST take appropriate safeguards
to protect people from using, contacting or
exposure to water or any parts of the water
distribution system. Always read and follow
the User Guide & Instruction Manual.
1. The Balancing Routine is designed to give the software additional information regarding the normal
operating balance of the system to eliminate the need for a balancing valve.
2. To conduct the Balancing Routine it is necessary to generate a load larger than the minimum rated flow
rate using the following procedure.
3. Attach a 1" hose to the pump inlet hose connection and ensure that the other end of the hose is securely
routed to a drain.
To Next Page
Loading...
Need help?
General
