63
Scheduled Testing, Inspection and Maintenance
Replacement Part Numbers
Testing/Inspection
WARNING
!
Need for Periodic Inspection/Maintenance: This product must be
tested periodically in compliance with local codes, but at least once per year
or more as service conditions warrant. All products must be retested once
maintenance has been performed. Corrosive water conditions and/or unauthor-
ized adjustments or repair could render the product ineffective for the service
intended. Regular checking and cleaning of the product’s internal and external
components helps assure maximum life and proper product function.
Replacement Part # Description
81019285 1 ½ Inch 3 way valve
81019286 2 Inch 3 way valve
81019287 Actuator
81019288 150psi Pressure sensor with wire (P)
88005572 200psi Pressure sensor with wire (P)
81019289 High speed temperature sensor with wire (FT)
81019060 Controller
81019061 Temperature sensor with wire (T)
To Next Page
Loading...
Need help?
General
