23
Set up and Programming
If you did not set up your own passcode, you can enter the factory default passcode 1017.
2. When the passcode is entered, you will be directed to the liability and responsibility acceptance screen:
3. You must touch the icon to proceed to the Programming Menu and to use system functions.
Touching the icon means you will not be able to change system settings and you accept all
default settings (including the outlet water temperature set point of 120°F/ 49°C) as safe and appropriate for
the water distribution system users and the facility. You will be returned to the “Programming” screen.
To Next Page
Loading...
Need help?
General
