Weber mt MC 85 - Before Starting Work

21
5.4. Before starting work
Perform the following tasks before starting to work in order
to prevent failures or excessive wear.
Visual inspections
Engine and cooling system for leaks
Hydraulic tank and lines for leaks
Fuel system for leaks
Rubberbu󰀨ersforcrackformation
Plugconnectionsofthepowergridforrmseat
Other damage
Function tests Emergency stop system of the radio remote control
Near-eldshutdownsystemoftheradioremotecontrol
Check and, if necessary,
correct the ll levels
Engine oil
Hydraulic oil
Fuel
Coolant
Other inspections Checkallthreadedunionsforrmseat
Verify compliance with the maintenance schedule
Check and, if necessary, empty the water separator of the
oillter