Weber mt MC 85 - Changing the Engine Oil

41
4
2
3
1
10.2.4. Changing the engine oil
Shuto󰀨themachineasdescribed
in section 5.8.
Open the hoods as described in
section 10.2.1.
Place a suitable collection vessel (1)
under the oil drain (2).
Open the oil drain (2) and allow the oil
to drain into the collection vessel (1).
Risk of scalding due to hot engine oil.
Close the oil drain (2).
Fill fresh engine oil into the oil inlet (3).
Fortheoilllquantity,refertotheapplicable
specicationsinthetableincludedin
section 10.3.
Finish by checking the engine oil level using
the dipstick (4). The oil level must range
between the markings.
ATTENTION
Properly dispose of waste oil in accordance
with environmental protection regulations.
WARNING
Only drain the engine oil when at operating temperature.
Wear protective gloves.
Do not reach into draining oil.
Risk of environmental damage!
min. max.