EasyManuals Logo

WEG CFW-11 User Manual

WEG CFW-11
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Safety Instructions
CFW-11 | 1-3
1
Do not perform any withstand voltage test!
If necessary, consult WEG.
NOTE!
Frequency inverter may interfere with other electronic equipment. In order to reduce these effects,
take the precautions recommended in the Chapter 3 INSTALLATION AND CONNECTION on page
3-1.
NOTE!
Read the user manual completely before installing or operating the inverter.
DANGER!
Crushing hazard
In order to ensure safety in load lifting applications, electric and/or mechanical devices must be
installed outside the inverter for protection against accidental fall of load.
DANGER!
This product was not designed to be used as a safety element. Additional measures must be taken
so as to avoid material and personal damages.
The product was manufactured under strict quality control, however, if installed in systems where its
failure causes risks of material or personal damages, additional external safety devices must ensure
a safety condition in case of a product failure, preventing accidents.
DANGER!
Risque d'écrasement
Afin d'assurer la sécurité dans les applications de levage de charges, les équipements électriques et/
ou mécaniques doivent être installés hors du variateur pour éviter une chute accidentelle des charges.
DANGER!
Ce produit n'est pas conçu pour être utilisé comme un élément de sécurité. Des précautions
supplémentaires doivent être prises afin d'éviter des dommages matériels ou corporels.
Ce produit a été fabriqué sous un contrôle de qualité conséquent, mais s'il est installé sur des systèmes
où son dysfonctionnement entraîne des risques de dommages matériels ou corporels, alors des
dispositifs de sécurité externes supplémentaires doivent assurer des conditions de sécurité en cas de
défaillance du produit, afin d'éviter des accidents.

Table of Contents

Other manuals for WEG CFW-11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WEG CFW-11 and is the answer not in the manual?

WEG CFW-11 Specifications

General IconGeneral
CategoryDC Drives
ModelCFW-11
Power Range1.1-560 kW (1.5-750 hp)
Overload Capacity150% for 60 seconds
Brakingdynamic braking (optional)
CommunicationModbus RTU
EnclosureIP20

Related product manuals