WEG CFW501 - Identification Labels; Receiving and Storage

CFW501 | 7
General Information
English
2.4 IDENTIFICATION LABELS
There are two identification labels: one complete nameplate, located on the side of the
inverter and a simplified label under the plug-in module. The label under the plug-in
module allows the identification of the most important characteristics of the inverter
even in inverters mounted side-by-side. For further details about the position of the
labels, see figure A.2.
Front Label of the CFW501 (Under the Plug-In Module)
Model (Smart code
of the inverter)
Stock item
Manufacturing date
Serial number
Side Label of the CFW501
Manufacturing date
Production order
Rated input data
(voltage, current
and frequency)
Rated input data
(voltage, current
and frequency)
Serial number
WEG stock item
Model (Smart code
of the inverter)
Figure 2.3: Description of the identification labels on the CFW501
2.5 RECEIVING AND STORAGE
The CFW501 is supplied packed in a cardboard box. On this package, there is an
identification label which is the same as the one attached to the side of the inverter.
Check if:
 The identification of the CFW501 matches the model purchased.
 Any damages occurred during transportation.
Report any damage immediately to the carrier.