Summary of Reviews
English
The information below describes the reviews made in this manual.
Version Review Description
- R00 First edition
- R01 General review
- R02 General review
- R03 New options of the V/f and VV W Control Type included and modified
- R04 General review and inclusion of frame D
ATTENTION!
Check the frequency of the power supply.
The CFW501 inverters have the factory default parameters set for line
frequency of 60 Hz.
In case the power supply frequency is different from the 60 Hz, it is
necessary to set:
P0204 = 6 for 50 Hz.
It is only necessary to set these parameters once.
Refer to the programming manual of the CFW501 for further details about
the setting of parameter P0204.
NOTE!
The CFW501 inverter models with power supply 200...240 V are under
development.
For further information, contact the Sales Department of WEG Automation.
To Next Page
Loading...
