To Next Page

To Previous Page

ENGLISH

Parameter Description / Notes

This parameter has the function to enable or disable, as well as to set the verification time

of the serial communication. This protection acts when the serial communication between

the master and the Soft-Starter is interrupted generating the respective indication or

introducing an action as set at parameter P313.

Note:

Enable this function only if there is a cyclic serial communication with a master.

Set the verification time according to the time of the telegrams sent by the master.

P314

Verification Time of the

Serial Communication

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com

Questions and Answers:

Need help?

Do you have a question about the WEG SSW-05 Plus Series and is the answer not in the manual?

WEG SSW-05 Plus Series Specifications

General