ENGLISH
Note: 1) The SSW-05 Plus electronic Soft-Starter has been designed to drive three-phase induction motors
applied to light duty loads, such as centrifugal pumps, small fans and screw compressors.
If the Soft-Starter shall be applied on heavy duty loads, please contact WEG.
2) The serial communication is available in the SSW-05 with software versions greater than V2.00.
The manual of the serial communication (0899.4587) is available for download on the website
www.weg.com.br.
With the serial communication is possible:
a) to connect the Soft-Starter in an equipment network, like PC, PLC, and others;
b) to use with SuperDrive software (417102505) for Microsoft Windows, allowing the SSW-05
programming and operation;
c) to use the remote HMI (human machine interface) for SSW-05 programming and operation.
1. SAFETY INSTRUCTIONS:
Always disconnect the power supply from the equipment before attempting any maintenance work.
Personnel must review this entire Manual before attempting to install and operate the SSW-05 Plus Soft-Starter.
Only qualified personnel should plan or implement the installation, start-up, setting, operation and maintenance of
this equipment.
2. WHAT IS THE SSW-05 PLUS SOFT-STARTER:
The SSW-05 Plus Soft-Starter allows smooth start/stop of three-phase induction motors.
3. HOW TO IDENTIFY THE SSW-05 PLUS:
SSW05
Soft-Starter
WEG Series 05
0003
Rated Output
Current:
0003 = 3A
0010 = 10A
0016 = 16A
0023 = 23A
0030 = 30A
0045 = 45A
0060 = 60A
0085 = 85A
T
Three-phase
Power Supply
2246
Power Supply
Voltage:
2246 =
220 to 460V
4657 =
460 to 575V
P
Manual
Language:
P= Portuguese
E= English
S= Spanish
P
SSW-05
Version:
P= Plus
Z
End of Code
Series: SSW-05 Plus
Software Version: 2.0X
0899.4668 /5
INSTALLATION
AND OPERATION
MANUAL
Example: The code SSW050010T2246PPZ means a 10A SSW-05 Plus, three-phase power supply in the range
from 220 to 460V, manual in Portuguese, PLUS version.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
