WEG SSW-05 Plus Series - Installation and Connection; Simplified Start;Stop Wiring; Start;Stop with Contactor and Push Buttons

ENGLISH
11. SSW-05 PLUS INSTALLATION AND CONNECTION:
11.1. Simplified Start/Stop on 230V/400 line:
11.2. Starting and Stopping using Contactor and Push Buttons:
The “T1” transformer is only required when the
line voltage is out of the range allowed for the
electronics supply (90 – 250Vac). For 400V,
use neutral conductor (N) and one phase.
230/400V
Symbol
Description
Fuse
Disconnecting Switch
(opens under load)
Transformer
N.O. switch
(with holding)
N.C. push button
(with automatic return)
N.O. push button
(with automatic return)
Contactor (coil)
Three-phase induction
motor
Symbol
Description
Fuse
Disconnecting Switch
(opens under load)
Transformer
N.O. switch
(with holding)
N.C. push button
(with automatic return)
N.O. push button
(with automatic return)
Contactor (coil)
Three-phase induction
motor
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com