49
Polaris
ENGLISH
User manual
!
Leave the steam nozzle immerged in the milk only
for the heating time required.
!
The use of the steam delivery point (steam nozzle),
must always be preceded by condensation draining
for at least 2 seconds.
!
Do not turn on the steam knob if the nozzle is in
the milk and the machine is o.
!
To keep the steam nozzle tips in perfect working
order, it is advisable to carry out a brief dry delivery
after each use. Keep the tips clean at all times using
a cloth dampened in lukewarm water. Handle the
nozzle with utmost caution due to the hazard
resulting from the presence of high-temperature
steam.
5
4
6
13
10.3 Dispensing steam
Immerge the steam nozzle into the liquid to be
heated and operate the tap knob (5) by turning it
horizontally: the steam coming out of the nozzle
(7) will be proportional to the opening of the tap.
If the knob is released, it will return to the o
position, stopping the dispensing.
By moving the knob vertically, it is possible to
lock it in the constant on position, in order to have
a continuous delivery of steam.
To stop the outow of steam through the nozzle,
manually return the knob to the OFF status, disen-
gaging it from the on position.
For optimal foaming, it is recommended to
observe the following simple rules:
t heat only the amount of milk you intend to use,
once heated, the milk will have to be completely
poured from the jug and mustn’t be heated again;
t the milk to be foamed must have a starting tem-
perature of 4°C;
Automatic
return
Automatic
return
Shutdown
Shutdown
OFF
To Next Page
Loading...
