51
Polaris
ENGLISH
User manual
12 Cup heater
12.1 EMA / EPU version
Place the cups to be heated on the cup heater
(2) and position the device switch located on the
machine’s command facade (X) to ON.
Conrm that the light (16) on the front of the
machine is on, as it indicates that the cup-heating
system is active.
2
16
i
The cup-heating device of the EMA and EPU versions
is not adjustable.
X
i
The system includes a 4-minute operation time-out
for the Autosteamer device.
i
To keep the steam dispensers in perfect working
order, it is advisable to carry out a brief dry delivery
after each use. Keep the ends of the of the nozzle
clean at all times by using a cloth dampened in
lukewarm water. If regular cleaning is not carried
out, the proper operation of the autosteamer can
be jeopardized.
i
Do not leave the autosteamer nozzle immerged
in the milk when it is not being used. Handle
the autosteamer with the utmost caution due to
the dangers resulting from the presence of high-
temperature steam.
i
Refer to service assistance to regulate the foam
of the milk.
!
The use of the steam delivery point (steam nozzle),
must always be preceded by condensation draining
for at least 2 seconds.
To Next Page
Loading...
Need help?
General
