WEIHONG NcEditor V12 - Page 100

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
98 / 144
Y-axis Manual Feed Acceleration
Acceleration in jog mode.
Used to control the acceleration in jog mode.
Range: [16, 100000]mm/ s
2
Default value: 2000
Z-axis Manual Feed Acceleration
Acceleration in jog mode.
Used to control the acceleration in jog mode.
Range: [8, 100000]mm/ s
2
Default value: 2000
W-axis Manual Feed Acceleration
Acceleration in jog mode.
Used to control the acceleration in jog mode.
Range: [0, 100000]mm/ s
2
Default value: 400
5.2.3 Manual Axial Jerk
X-axis Manual Feed Jerk
Jerk in jog mode.
Used to control the jerk in jog mode.
Range: [16, 100000]mm/ s
3
Default value: 10000
Y-axis Manual Feed Jerk
Jerk in jog mode.
Used to control the jerk in jog mode.
Range: [16, 100000]mm/ s
3
Default value: 10000