上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
100 / 144
Gxx Acc
Single axis acceleration is used to describe the acceleration/deceleration capability
of single feed axis.
Decided by the physical feature of the machine tool, such as quality of motion part,
torque and resistance of the feed motor.
The larger the value is, the less time the machine tool spends in
acceleration/deceleration during motion process, and the higher the efficiency is.
Set a smaller value at first, and repeatedly execute typical motions for a period of
time. If there is no abnormal situation, you can gradually increase the value. If
abnormal condition occurs, you should reduce the value, with 50%~100%
insurance allowance.
Range: [100, 100000]mm/ s
2
Default value: 5000
Cornering Acc
Maximum acceleration when feed motion is on two adjacent axes.
Recommended value is 1~2 times of single axis acceleration.
Range: [0.001, 100000]mm/ s
3
Default value: 5000
Gxx Jerk
Change rate of single axis acceleration during machining.
Range: [0.001, 9999999]mm/ s
3
Default value: 100000
Speed of Z Motion
Motion speed of Z-axis during machining.
Range: [0.06, Maximum speed of Z-axis]mm/min
Default value: 15000
G00 Acc of B-axis
Single axis acceleration in positioning.
Range: [100, 100000]mm/ s
2
Default value: 400
To Next Page
Loading...
