上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
64 / 144
You can set step size by doing one of the following:
• To customize step size, click the first button, and enter the value
in Customize Step Size dialog box.
• To set fixed step size, click one of the last three buttons.
4.1.3 Follow-up Control Buttons
It is used to control the machine tool to execute operations related to follow-up.
It includes the following:
• : Follow-up
After the button is clicked, the system automatically starts to follow at the
presence of calibration data.
To stop following and move Z-axis to the berth point, click the button again.
To end follow-up with Z-axis stopping at the current position, click .
• : Capacitance Calibration
After the button is clicked, the system automatically calibrates capacitance.
To stop automcatic calibration, click the button again.
• : Z-axis Homing
After the button is click, Z-axis returns to the machine origin.
To stop returning to the machine origin, click the button again or click .
After returning to the machine origin, sign appears before Z-axis.
To Next Page
Loading...
