上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
66 / 144
• Real-time Capacitance page
Used to show real-time change of capacitance in certain time.
X-axis coordinate shows time while Y-axis coordinate shows the capacitance.
Max Differ on the upper left shows the difference between the maximum
capacitance and the minimum one when the cutting head and the workpiece
are still.
The larger the value is, the stronger the interference is and the less stable the
capacitance measurement is. Thus, the ideal value is no more than 30.
• Follow Error page
Used to show the difference between current follow-up height and the set value
of parameter Follow Height, so as to reflect the follow-up dynamic precision.
To Next Page
Loading...
