上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
87 / 144
PG Frequency Dividing Ratio of Y
Ratio of sending pulse to feedback pulse in Y-axis.
Positive value: positive direction of axis encoder
Negative value: negative direction of axis encoder
0: not enable encoder feedback
Range: [-10000, 10000]
Default value: -1
Max. Speed
Maximum allowable speed of Y-axis.
Range: (0, maximum speed supported by hardware]mm/min
Default value: 60000
Enable Soft Limit Protection
Used to prevent the machine tool from colliding with hard limit switch.
Yes: enable
No: not enable
Default value: Yes
Enable Soft Limit Protection
Used to prevent the machine tool from colliding with hard limit switch.
Yes: enable
No: not enable
Default value: Yes
Soft Limit Lower Limit
Lower limit of soft limit.
Range: [-999999, soft limit upper limit)mm
Default value: 0
Soft Limit Upper Limit
Upper limit of soft limit.
Range: (soft limit lower limit, 999999]mm
Default value: 3000
To Next Page
Loading...
