上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
88 / 144
5.1.3 Z-axis
Pulse Equivalent
Displacement or angle caused by per pulse in Z-axis.
Range: [1E-08, 1000]mm/p
Default value: 0.001
Axis Direction
Moving direction of Z-axis.
If the moving direction of Z-axis is opposite to the direction judged by Right Hand
Rule when the machine tool is moved manually, modify the value of the this
parameter.
1: Positive
-1: Negative
Default value: 1
PG Frequency Dividing Ratio of Z
Ratio of sending pulse to feedback pulse in Z-axis.
Positive value: positive direction of axis encoder
Negative value: negative direction of axis encoder
0: not enable encoder feedback
Range: [-10000, 10000]
Default value: -1
Encoder Feedback Tolerance
Tolerance of encoder feedback position and current position.
Range: [0, 10000]mm
Default value: 0.001
Max. Speed
Maximum allowable speed of Z-axis.
Range: (0, maximum speed supported by hardware]mm/min
Default value: 36000
To Next Page
Loading...
