上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
93 / 144
Z Speed in Coarse Positioning
Feedrate of Z-axis in coarse positioning stage during returning to the machine
origin.
Range: [0.06, 9000]mm/min
Default value: 1800
Z Speed in Precision Positioning
Feedrate of Z-axis in fine positioning stage during returning to the machine origin.
Range: [0.06, 6000]mm/min
Default value: 60
Back Distance of Z
Z-axis additional displacement after fine positioning stage during returning to the
machine origin.
Positive value: Z-axis moving direction in retract stage is opposed to that in coarse
positioning stage.
Negative value: Z-axis moving direction in retract stage is the same with that in
coarse positioning stage.
Range: [-100, 1000]mm
Default value: 2
5.1.9 Origin Setting (W)
W Direction in Coarse Positioning
Moving direction of W-axis in coarse positioning stage during returning to the
machine origin.
1: Positive
-1: Negative
Default value: -1
W Speed in Coarse Positioning
Feedrate of W-axis in coarse positioning stage during returning to the machine
origin.
Range: [0.06, 9000]mm/min
Default value: 600
To Next Page
Loading...
