上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
94 / 144
W Speed in Precision Positioning
Feedrate of W-axis in fine positioning stage during returning to the machine origin.
Range: [0.06, 6000]mm/min
Default value: 60
Back Distance of W
W-axis adjusting displacement after fine positioning stage during returning to the
machine origin.
Range: [-100, 1000]mm
Default value: 2
5.1.10 Error Compensation Setting
Lead Screw Compensation Mode
Mode used to compensate lead screw error.
0: no compensation
1: backlash compensation
2: screw error compensation
Backlash X
Valid only when lead screw compensation mode is set as backlash compensation.
Range: [0, 0.1]mm
Default value: 0
Backlash Y
Valid only when lead screw compensation mode is set as backlash compensation.
Range: [0, 0.1]mm
Default value: 0
Backlash W
Valid only when lead screw compensation mode is set as backlash compensation.
Range: [0, 0.1]mm
Default value: 0
To Next Page
Loading...
