EasyManua.ls Logo

Wheatstone IP-12 - Page 4

Default Icon
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Atte n tio n
Re Ad Me !
IP-12/IP-16 / Dec 2014
Attention!
This Wheatstone IP-12/IP-16 system is factory congured as a standalone
system.
The IP-12/IP-16 control surface is congured with a default IP address of
192.168.87.201.
The WheatNet-IP 88cb Console BLADE is congured with a default
IP address of 192.168.87.101.
If the default addresses will work for you, there is no need to do any
network conguration of either the IP-12/IP-16 Control Surface or the
Console BLADE. However, if you intend to install the IP-12 system as part
of a larger WheatNet-IP system, you will need to change the default IP ad-
dresses of both the IP-12 and the Console BLADE. Careful consideration
should be given when planning your IP Address scheme to ensure there
are no IP address conicts that could render the system inoperable.
If you have additional questions or should you need assistance, please
contact Wheatstone support. Support can be reached by calling 252-638-7000
or email at techsupport@wheatstone.com.

Table of Contents