WIKA CEP6000 - Product Overview and Components

6
WIKA operating instructions, model CEP6000
MM/YYYY country code based on 10/2014 GB/CN
GB
1
2
3
Abbreviations, definitions
RTD Resistance thermometer
TC Thermocouple
2W 2-wire measurement
Two test cables are used for the voltage supply.
The measurement signal also provides the supply current.
3W 3-wire measurement
Two test cables are used for the voltage supply.
One test cable is used for the measurement signal.
4W 4-wire measurement
Two test cables are used for the voltage supply.
Two test cables are used for the measurement signal.
CJC Cold junction compensation
2. Short overview
2.1 Overview
Display
Keypad
Connections
1
2
3
1. General information / 2. Short overview