3. Safety
3.1 Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious
injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries
or damage to equipment or the environment, if not avoided.
DANGER!
... identifies hazards caused by electrical power. Should the safety instruc-
tions not be observed, there is a risk of serious or fatal injury.
Information
... points out useful tips, recommendations and information for efficient
and trouble-free operation.
3.2 Intended use
The model CEP6000 hand-held multi-function calibrator is a battery-operated hand-held
instrument which can measure and output/simulate current, voltage, resistance, RTD’s,
TC’s, frequency and pulses.
In addition, external pressure sensors/pressure modules can be connected which enable
pressure to measure with this calibrator. The WIKA model CPT6600 pressure modules
and the Mensor model CPT6100/CPT6180 precision pressure sensors are compatible
here.
This instrument is not permitted to be used in hazardous areas!
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
3. Safety
To Next Page
Loading...