Wilo Wilo-Control EC-L User Manual

Commissioning en
Installation and operating instructions Wilo-Control EC-L 89
‡ Configuration complete.
‡ Direction of rotation correct.
‡ Motor current monitoring set correctly.
1. Start Easy Actions menu: Turn the operating button 180°.
2. Select the pump for automatic mode: Turn the operating button until the menu
item is displayed:
– Pump 1: P1 Auto
– Pump 2: P2 Auto
– Pump 3: P3 Auto
3. Press the operating button.
⇒ Automatic mode is set for the selected pump. Alternatively, setting can be
performed in Menu 3.02 to 3.04.
▶ Automatic mode switched on. The pumps are switched on and off automatically,
depending on the fill levels.
Automatic mode after decommissioning
‡ The switchgear is closed.
‡ Checked configuration.
‡ Parameter input enabled: Menu 7.01 shows on.
1. Press the operating button for 3s.
⇒ Menu 1.00 appears.
2. Turn the operating button until menu 3.00 appears
3. Press the operating button.
⇒ Menu 3.01 appears.
4. Press the operating button.
5. Change value to “on”.
6. Press the operating button.
⇒ Value saved, pump enabled.
▶ Automatic mode switched on. The pumps are switched on and off automatically,
depending on the fill levels.
8.7 During operation
During operation make sure the following points are observed:
▪Keep the switchgear closed and secure it against unauthorised opening.
▪Switchgear attached in an overflow-proof manner (protection class IP54).
▪Not exposed to direct sunlight.
▪Ambient temperature between -30°C and +50°C.
The following items of information are shown on the main screen:
▪Pump status:
– Number of registered pumps
– Pump activated/deactivated
– Pump On/Off
▪Operation with standby pump
▪Operating mode: fill or drain
▪Current water level or switching state of the float switch
▪Active field bus operation
Furthermore, the following information is available via menu 4:
1. Press the operating button for 3s.
⇒ Menu 1.00 appears.
2. Turn the operating button until menu 4 appears.
3. Press the operating button.
▶ Menu 4.xx appears.
Current water level in m

Wilo Wilo-Control EC-L Specifications

General

Brand	Wilo
Model	Wilo-Control EC-L
Category	Control Unit
Language	English