Wirepath WPS-365-DVR - Page 50

50
WPS-365-DVR-9CH & 16CH Installation and Users Manual
 •ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and return
to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.” If the contents
in this menu have been modied, a Save dialog box will be displayed requesting the user to save the
changes. Press ENTER on the front panel of the DVR or remote control to exit and save, ESC to exit without
saving. Another method to escape is to use the mouse to “right-click,” and exit the sub menu.
Thefollowingisabriefdescriptionforeachiteminthismenuanditsspecicoperations:
WARNING – The following 2 features could allow unwarranted access to the DVR. Caution is strongly advised when
enabling these features.
• Local Guest Level
Allows or restricts access to the DVR by Guests accessing the DVR through Local interfaces (DVR GUI via front
panel buttons, IR remote control or home automation Ethernet control) without a dedicated Login. The option
selected determines the level of access a Guest will have.
“-“ (Default) - No Guest Access Allowed (Does not prevent access by User with login credentials)
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
Supervisor - Provides access to view and control all cameras, Search, Archive and modify basic settings.
Administrator - Provides full access to the DVR allowing for viewing of all cameras and modication to all
settings. Use this setting with caution.
UserName - Provides customized access to the features dened in the Advanced Settings for a particular
user. See Adv: below for more information.
Note: A minimum of operator permission level is needed for a third party automation system to control the DVR
 •RemoteGuestLevel
Allows or restricts access to the DVR by Guests accessing the DVR from the Internet Explorer plugin interface
without a dedicated Login. The option selected determines the level of access a Remote Guest will have.
“-“ (Default) - No Guest Access Allowed (Does not prevent access by User with login credentials -
recommended.)
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
Supervisor- Provides access to view and control all cameras, Search, Archive and modify basic settings.
Administrator - Provides full access to the DVR allowing for viewing of all cameras and modication to all
settings. Use this setting with caution.
UserName - Provides access to the features as dened in the Advanced Settings for a particular user. See
Adv: below for more information.
NOTE: It is recommended that Remote Guest Level be set to the default “-“ to prevent unwarranted access to the
DVR from outside sources.
 •AutoLogout
If there is no user operation in the time selected from 1 minute to 24 hours, the user will automatically be logged
out. Select “-“ to disable this feature (default setting). Press +/- buttons on the front panel of the DVR or on the
remote control to change this setting. Alternatively use the mouse to set this value.
 •LoginName
Enter a unique Name for each user. Follow the Text Input method described in Section 4.1 to enter this
information.