Need help?Do you have a question about the Wirepath WPS-300-DVR and is the answer not in the manual?
Provides guidelines for safely and effectively positioning the DVR for optimal performance and cooling.
Details how to connect cameras, monitors, audio, alarms, and network devices to the DVR.
Instructions for updating the DVR's firmware via a local USB drive.
Explains the correct procedure to safely shut down the DVR to prevent hard drive damage.
Allows formatting, clearing, and partitioning of hard drives for alarm and normal recording.
Allows adding, deleting, and modifying user accounts, passwords, and access levels.
Sets up all Ethernet network parameters including IP address, subnet mask, and gateway.
Allows searching for recorded video and audio based on specific year, month, date, hour, and minute.
Enables searching for recorded events like alarms, motion, video loss, and system logs.
Details how to access the DVR remotely from a PC using an Internet Explorer browser.
Covers viewing live video, split-window options, and controlling the DVR remotely via PC.
Provides instructions for installing and configuring the mobile application for remote access.
To Next Page
General